Dell PowerVault Manual page 226

file can be just RAID configuration data or all data, including data for RAID configuration, disk groups and
disk pools. The data in a cache location always includes all data.
Before using this command with the file option, you must first obtain a validator string (a security code)
from your Technical Support representative. To obtain a validator, use the save storageArray
dbmValidator command to generate an XML file that contains validator information.
Syntax
load storageArray dbmDatabase
((file="filename" validator="validatorValue") | sourceLocation=onboard)
[controller [(0|1)]]
[contentType=(raidConfigration | all)]
Parameters
Parameter
file
validator
sourceLocation
controller
contentType
226
Description
The file path and the file name of the DBM
database you want to upload. Enclose the file
name in double quotation marks (" "). For example:
file="C:\Array Backups
\DBMbackup_03302010.dbm". This command
does not automatically append a file extension to
the saved file. You must specify a file extension
when entering the file name.
The alphanumeric security code required to
restore a storage array to an existing configuration.
Use the save storageArray dbmValidator
command to generate the required validation
information XML file.
This parameter specifies the location from which
to retrieve backup database information. The
parameter must be included for consistency, but
the only allowed value is onboard.
This parameter specifies the controller from which
data will be exclusively retrieved, if
sourceLocation is set to cache. Enclose the
controller identifier in square brackets ([ ]). If the
controller parameter is not specified, data
might be retrieved from either controller.
Valid controller identifiers are 0 or 1, where 0 is the
controller in slot 0, and 1 is the controller in slot 1.
This parameter specifies the content type of the
data that is retrieved.
• If the parameter is set to raidConfiguration,
the RAID configuration data is retrieved. The
RAID configuration data includes disk groups
and associated virtual disks.