Table of Contents
Advertisement
Show Storage Array Negotiation Defaults
Description
This statement returns information about connection-level settings that are subject to initiator-target
negotiation.
Syntax
show storageArray iscsiNegotiationDefaults
Parameters
None.
NOTE: Information returned includes RAID controller module default settings (settings that are the
starting point for negotiation), and the current active settings.
Show Storage Array Unconfigured iSCSI Initiators
Description
This command returns a list of initiators that have been detected by the storage array but are not yet
configured into the storage array topology.
Syntax
show storageArray unconfiguredIscsiInitiators
Parameters
None.
Show Storage Array Unreadable Sectors
Description
This command returns a table of the addresses of all of the sectors in the storage array that cannot be
read. The table is organized with column headings for the following information:
•
Virtual disk user label
•
Logical unit number (LUN)
•
Accessible by (host or host group)
•
Date/time
•
Virtual disk-relative logical block address (hexadecimal format – 0xnnnnnnnn)
•
Physical disk location (enclosure t, slot s)
•
Physical disk-relative logical block address (hexadecimal format – 0xnnnnnnnn)
•
Failure type
347
Advertisement
Table of Contents
