Remove Member Virtual Disk From Consistency Group; Remove Physical Disks From Ssd Cache - Dell PowerVault Manual

Remove Member Virtual Disk From Consistency Group

Description
This command removes a member virtual disk from a an existing snapshot consistency group. Optionally,
you can delete the repository virtual disk members from the consistency group.
Syntax
set consistencyGroup ["consistencyGroupName"]
removeCGMemberVirtualDisk=memberName
[deleteRepositoryMembers=(TRUE | FALSE)]
Parameters
Parameter
consistencyGroupName
memberName
deleteRepositoryMembers

Remove Physical Disks From SSD Cache

Description
This command decreases the capacity of the SSD cache by removing Solid State Disks (SSDs).
Syntax
set ssdCache [ssdCacheName]
removePhysicalDisks=(enclosureID1,drawerID1,slotID1 ...
enclosureIDn,drawerIDn,slotIDn)
Parameters
Parameter
ssdCache
Description
The name of the consistency group from which
you want to remove a member. Enclose the
consistency group name in double quotation
marks (" ") inside square brackets ([ ]).
The name of the member virtual disk that you want
to remove.
Determines whether to remove all of the
repository members from the consistency group.
Description
The alphanumeric identifier (including - and _) of
the SSD cache from which you want to remove
SSDs. Enclose the identifier in square brackets ([ ]).
If the SSD cache name contains special characters
or consists only of numbers, you also must enclose
235