Set Consistency Group Snapshot Virtual Disk - Dell PowerVault Manual

autoDeleteLimit=numberOfSnapImages|
rollbackPriority=(lowest | low | medium | high | highest)]
Parameters
Parameter
consistencyGroupName
userLabel
repositoryFullPolicy
repositoryFullLimit
autoDeleteLimit
rollBackPriority

Set Consistency Group Snapshot Virtual Disk

Description
This command creates a unique name for a snapshot virtual disk of a consistency group.
Syntax
set cgSnapVirtualDisk [consistencyGroupName]
userLabel="snapVirtual DiskName"
270
Description
The name of the consistency group for which you
are setting properties. Enclose the consistency
group name in double quotation marks (" ") inside
square brackets ([ ]).
The new name that you want to give to the
snapshot consistency group. Enclose the new
consistency group name in double quotation
marks (" ").
How you want snapshot processing to continue if
the snapshot repository virtual disks are full. You
can choose to fail writes to the base virtual disk
(failBaseWrites) or delete (purge) the snapshot
images (purgeSnapImages). The default action is
purgeSnapImages.
The percentage of repository capacity at which
you receive a warning that the snapshot repository
virtual disk is nearing full. Use integer values. For
example, a value of 70 means 70 percent. The
default value is 75.
The maximum number of snapshot images that
you want to automatically delete if you have
selected to purge the snapshot images for a
repository full policy. The default value is 32.
The priority for rollback operations for a
consistency group while the storage array is
operational. Valid values are highest, high,
medium, low, or lowest.