Table of Contents
Advertisement
Syntax
clear (allVirtualDisks | virtualDisk [virtualDiskName]
| virtualDisks [virtualDiskName1... virtualDiskNameN])
reservations
Parameters
Parameter
allVirtualDisks
virtualDisk or virtualDisks
NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the
names. Command names can have a maximum of 30 characters. If you exceed the maximum
character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation.
Clear Virtual Disk Unreadable Sectors
Description
This command clears the unreadable sector information from one or more virtual disks.
Syntax
clear (allVirtualDisks | virtualDisk
[virtualDiskName] | virtualDisks [virtualDiskName1
... virtualDiskNameN]) unreadableSectors
Parameters
Parameter
allVirtualDisks
virtualDisk or virtualDisks
Description
Clears reservations on all virtual disks in the
storage array.
Name of the specific virtual disk for which to clear
reservations. You can enter more than one virtual
disk name. You must put brackets ([ ]) around the
virtual disk name. If the virtual disk name has
special characters, you must also put quotation
marks (" ") around the virtual disk name.
Description
Clears unreadable sector information from all of the virtual disks
in the storage array.
The name of the specific virtual disk for which you want to clear
unreadable sector information. You can enter more than one
virtual disk name. Enclose the virtual disk name in square
brackets ([ ]). If the virtual disk name has special characters, you
also must enclose the virtual disk name in double quotation
marks (" ").
153
Advertisement
Table of Contents
