Dell PowerVault Manual page 277

Parameters
Parameter
host
hostGroup
userLabel
hostType
Host Group Parameter
hostGroupName
none
defaultGroup
NOTE: When you use this command, you can specify one or more of the optional parameters. You
do not, however, need to use all of the parameters.
NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the
names. Command names can have a maximum of 30 characters. If you exceed the maximum
character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation.
Description
The name of the host that you want to assign to a
host group. Enclose the host name in square
brackets ([ ]). If the host name has special
characters, you must also enclose the host name
in double quotation marks (" ").
The host group to which you want to assign the
host. (The following table defines how the
command runs if the host does or does not have
individual virtual disk-to-LUN mappings.) Enclose
the host group name in double quotation marks ("
"). The defaultGroup is the host group that
contains the host to which the virtual disk is
mapped.
The new host name. Enclose the host name in
double quotation marks (" ").
The index label or number of the host type for the
HBA host port. Use the show storageArray
hostTypeTable command to generate a list of
available host type identifiers. If the host type has
special characters, enclose it in double quotation
marks (" ").
Host Has Individual Virtual Disk-
to-LUN Mappings
The host is removed from the
present host group and is placed
under the new host group
defined by hostGroupName.
The host is removed from the
host group as an independent
partition and is placed under the
root node.
The command fails.
Host Does Not Have Individual
Virtual Disk-to-LUN Mappings
The host is removed from the
present host group and is placed
under the new host group
defined by hostGroupName.
The host is removed from the
present host group and is placed
under the default group.
The host is removed from the
present host group and is placed
under the default group.
277