Dell PowerVault Manual page 188

Modular disk storage arrays
Hide thumbs Also See for PowerVault:
Table of Contents

Advertisement

enableSchedule=(TRUE | FALSE)
schedule=(immediate | snapshotSchedule)]
Parameters
Parameter
baseVirtualDisk
repositoryRAIDLevel
repositoryPhysicalDisks
repositoryPhysicalDiskCount
repositoryDiskGroupUserLabel
repositoryDiskGroup
userLabel
enclosureLossProtect
188
Description
The name of the base virtual disk from which you
want to take a snapshot (legacy). Enclose the base
virtual disk name in double quotation marks (" ").
Use this parameter when you create a new disk
group.
The RAID level for the snapshot (legacy) repository
disk group. Valid values are 1, 5, or 6.
Use this parameter when you create a new disk
group.
The physical disks that you want to assign to the
snapshot (legacy) repository disk group. Specify the
enclosure ID value and the slot ID value for each
physical disk that you assign to the snapshot
(legacy) repository virtual disk. Enclosure ID values
are 0 to 99. Slot ID values are 0 to 31. Enclose the
enclosure ID values and the slot ID values in
parentheses.
Use this parameter when you create a new disk
group.
The number of unassigned physical disks that you
want to use for the snapshot (legacy) repository
disk group.
Use this parameter when you create a new disk
group.
The name of a new disk group to be used for the
repository virtual disk. Enclose the repository disk
group name in double quotation marks (" ").
The name of an existing disk group where you
want to place the repository virtual disk. Use this
parameter if you do not want to put the repository
virtual disk in the same disk group as the base
virtual disk. The default is to use the same disk
group for both the base virtual disk and the
repository virtual disk. Enclose the name of the
repository disk group in double quotation marks ("
").
The name that you want to give to the snapshots
(legacy) virtual disk. If you do not want to provide a
name, the CLI creates a name using the base
virtual disk user label that you provide.
The setting to enforce enclosure loss protection
when you create the snapshot (legacy) repository

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powervault series

Table of Contents