Dell PowerVault Manual page 297

warningThresholdPercent=percentValue
repositoryFullPolicy=(failSourceWrites |
failSnapshot)
enableSchedule=(TRUE | FALSE) |
schedule=(immediate | snapshotSchedule)
rollbackPriority=(0 | 1 | 2 | 3 | 4)
Parameters
Parameter
virtualDisk or virtualDisks
userLabel
warningThresholdPercent
repositoryFullPolicy
enableSchedule
schedule
Description
The name of the specific snapshot virtual disk for
which you want to define properties. (You can
enter more than one virtual disk name if you use
the virtualDisks parameter). Enclose the snapshot
virtual disk name in double quotation marks (" ")
inside of square brackets ([ ]).
A new name that you want to give to a snapshot
virtual disk. Enclose the new snapshot virtual disk
name in double quotation marks (" ").
The percentage of repository capacity at which
you receive a warning that the snapshot repository
is nearing full. Use integer values. For example, a
value of 70 means 70 percent. The default value is
50.
How you want snapshot processing to continue if
the snapshot repository virtual disk is full. You can
choose to fail writes to the source virtual disk
(failSourceWrites) or fail writes to the snapshot
virtual disk (failSnapshot). The default value is
failSnapshot.
Turns on or off the snapshot scheduling feature.
To turn on snapshot scheduling, set this parameter
to TRUE. To turn off snapshot scheduling, set this
parameter to FALSE.
Use this parameter to schedule a snapshot
operation, with the following options:
•
immediate
•
startDate
•
scheduleDay
•
startTime
•
scheduleInterval
•
endDate
•
noEndDate
•
timesPerDay
•
timeZone
For more information, see Scheduling Snapshots.
297