Save Storage Array State Capture
Description
This command saves the state capture to a file.
Syntax
save storageArray stateCapture file="filename"
Parameters
Parameter
file
Save Storage Array Support Data
Description
This command saves the storage array support-related information to a file.
Support-related information includes:
•
The storage array profile
•
The Major Event Log information
•
The NVSRAM data
•
Current problems and associated recovery information
•
The performance statistics for the entire storage array
•
The persistent registration information and the persistent reservation information
•
Detailed information about the current status of the storage array
•
The diagnostic data for the physical disk
•
A recovery profile for the storage array
•
The unreadable sectors that are detected on the storage array
•
The state capture data
•
An inventory of the versions of the firmware running on the RAID controller modules, the physical
disks, and the RAID controller modules
Syntax
save storageArray supportData file="filename"
[force=(TRUE | FALSE)]
266
Description
Name of the file to which to save the state capture.
You must put quotation marks (" ") around the file
name.