Syntax
resume cgSnapVirtualDisk ["snapVirtualDiskName"]
cgSnapImage="snapImageName"
Parameters
Parameter
cgSnapVirtualDisk
cgSnapImage
Notes
The name of a snapshot image has two parts separated by a colon (:):
•
The identifier of the snapshot group
•
The identifier of the snapshot image
For example, if you want to restart a copy-on-write operation for snapshot image 12345 which is in
snapshot consistency group snapgroup1 in a consistency group snapshot virtual disk that has the name
snapVol1, you would use this command:
resume cgSnapVirtualDisk ["snapVol1"] cgSnapImage=["snapgroup1:12345"]
Description
The name of the consistency group snapshot
virtual disk for which you want to restart a rollback
operation. Enclose the name of the consistency
group snapshot virtual disk in double quotation
marks (" ") inside square brackets ([ ]).
The name of the snapshot image in a consistency
group that you are restarting. The name of a
snapshot image is comprised of two parts:
•
The name of the consistency group.
•
An identifier for the snapshot image in the
consistency group.
The identifier for the snapshot image can be one of
these:
•
An integer value that is the sequence number
of the snapshot in the consistency group.
•
NEWEST - Use this option when you want to
show the latest snapshot image created in the
consistency group.
•
OLDEST - Use this option when you want to
show the earliest snapshot image created in the
consistency group.
Enclose the snapshot image name in double
quotation marks (" ").
247