Table of Contents
Advertisement
Start Disk Group Export
Description
This command moves a disk group into an Exported state. Then you can remove the physical disks that
comprise the disk group and reinstall the physical disks in a different storage array.
NOTE: Within the disk group, you cannot move virtual disks that are associated with the premium
features from one storage array to another storage array.
Syntax
start diskGroup [diskGroupName] export
Parameters
Parameter
diskGroup
Additional Information
When this command is successful, you can run the start diskGroup import command to finish
moving the disk group to a Complete state, which makes the disk group available to the new storage
array.
If this command is unsuccessful because hardware problems prevented the completion of the export,
use the set diskGroup forceState command. The set diskGroup forceState command lets
you use the start diskGroup import command to import a disk group.
After the disk group is in an Exported state or a Forced state, you can remove the physical disks that
comprise the disk group from the storage array. You can reinstall the physical disks in a different storage
array.
Start Disk Group Import
Description
This command moves a disk group into a Complete state to make a newly introduced disk group
available to its new storage array. The disk group must be in an Exported state or a Forced state before
you run this command. Upon successfully running the command, the disk group is operational.
NOTE: Within the disk group, you cannot move virtual disks that are associated with the premium
features from one storage array to another storage array.
Syntax
start diskGroup [diskGroupName] import
Description
Number of the disk group to defragment. You
must put brackets ([ ]) around the disk group
number.
357
Advertisement
Table of Contents
