Dell PowerVault Manual page 244

Parameters
Parameter
asyncRemoteReplicationGroup
virtualDisk
sampleType
Notes
Statistics are reset for replicated virtual disks in the Primary role. The statistics that are reset include the
following data:
• Synchronization start time
• Synchronization type (manual or periodic)
• Synchronization duration
• Number of bytes sent
• Maximum and minimum write time (for a single write)
• Maximum and minimum synchronization data rate
• Total write time
• Repository utilization (%)
244
Description
The name of the remote replication group for
which you are resetting the synchronization
statistics. Enclose the remote replication group
name in square brackets ([ ]). If the remote
replication group name has special characters, you
also must enclose the remote replication group
name in double quotation marks (" ") inside square
brackets. If the remote replication group name
consists only of numbers, such as "1002," you also
must enclose the remote replication group name
in double quotation marks (" ") inside square
brackets.
This parameter is optional. The name of the
specific member virtual disk in the remote
replication group for which you are resetting the
synchronization statistics. If no virtual disk is
specified, the statistics for every member virtual
disk in the remote replication group are reset.
Enclose the virtual disk name in double quotation
marks (" ").
This parameter is optional. The default value for
sampleType is all.
• all—Data for all three sample types are reset.
• mostRecent—Statistics are reset for the most
recent 50 resynchronization samples.
• longestSyncTime—Statistics are reset for the
most recent 20 longest resynchronization
samples.
• errors—Statistics are reset for the most recent
20 failed resynchronization samples.