Start Snapshot Rollback; Start Snapshot Image Rollback - Dell PowerVault Manual

Start Snapshot Rollback

Description
This command starts a rollback operation for one or more snapshot virtual disks. The content of the base
virtual disk changes immediately to match the content of the selected snapshot virtual disk at that point
in time. The base virtual disk immediately becomes available for read/write requests after the rollback
operation has successfully completed. To stop a snapshot rollback operation, use the stop rollback virtual
disk command. The repository virtual disk that is associated with the snapshot continues to track any new
changes between the base virtual disk and the snapshot virtual disk that occurs after the rollback
operation is completed.
Syntax
start rollback (virtualDisk [snapshotVirtualDiskName]
|
virtualDisks [snapshotVirtualDiskName1 ... snapshotVirtualDiskNameN])
Parameters
Parameter
virtualDisk or
virtualDisks

Start Snapshot Image Rollback

Description
This command starts a rollback operation for a set of snapshot images. The content of the base virtual
disk changes immediately to match the point-in-time content of the selected snapshot image virtual disk.
The base virtual disk immediately becomes available for read/write requests after the rollback operation
has successfully completed. To stop a snapshot image rollback operation, use the stop rollback
snapImage command.
The repository virtual disk that is associated with the snapshot image continues to track any new changes
between the base virtual disk and the snapshot image virtual disk that occur after the rollback operation is
completed.
NOTE: You cannot use this command for snapshot images involved in online virtual disk copy.
Syntax
start snapImage ["snapImageName"] rollback
364
Description
Names the specific snapshot virtual disk or
snapshot virtual disks for which you want to start a
rollback operation. Enclose the snapshot virtual
disk name in square brackets ([ ]). If the snapshot
virtual disk name has special characters, you must
also enclose the snapshot virtual disk name in
double quotation marks (" ").