Table of Contents
Advertisement
Parameter
-q
-r
-S (uppercase)
Definition
•
The password is specified in a script file that is
running.
•
The storage array password is specified by
using the -c parameter and the set session
password=password command.
Use to specify how frequently to include additional
profile or support bundle information in the e-mail
alert notifications. An e-mail alert notification that
contains at least the basic event information is
always generated for every critical event. If you set
the-I parameter to eventOnly, the only valid
argument for -q is everyEvent. If you set the-I
parameter to either profile or supportBundle,
this information is included with the e-mails with
the frequency specified by the-q parameter.
Valid frequency arguments are:
•
everyEvent— Information is returned with
every e-mail alert notification.
•
2— Information is returned no more than once
every two hours.
•
4— Information is returned no more than once
every four hours.
•
8— Information is returned no more than once
every eight hours.
•
12— Information is returned no more than
once every 12 hours.
•
24— Information is returned no more than
once every 24 hours.
Use with the -a or -x parameter to specify the
name of a management station. The name of a
management station can be either direct_sa (out-
of-band storage array) or host_sa (in-band storage
arrays [host-agent]). The -r parameter enables you
to set or change the alert notifications for all
storage arrays under each management station.
Use to suppress the informational messages
describing command progress that appear when
running script commands. (Suppressing
informational messages is also called silent mode.)
This parameter suppresses the following messages:
•
Performance syntax check
•
Syntax check complete
•
Executing script
•
Script execution complete
•
SMcli completed successfully
21
Advertisement
Table of Contents
