Table of Contents
Advertisement
Parameter
criticalPriority
backgroundPriority
Set Disk Pool Complete
Description
This command sets a disk pool that is in an Incomplete state to the Complete state.
Syntax
set diskPool [diskPoolName] complete
Parameter
Parameter
diskPool
Set Enclosure Attribute
Description
This command sets user-defined attributes for an enclosure.
Syntax
set enclosure [enclosureID] (chassisName | assetTag)= "userID"
274
Description
full capacity. Use integer values. For example, a
value of 70 means 70 percent. For best operation,
the value for this parameter must be less than the
value for the criticalThreshold parameter.
Setting this parameter to 0 disables warning alerts.
This parameter governs the priority for critical
reconstruction activities on the disk pool.
This parameter governs the priority for background
task activities on the disk pool.
Description
The alphanumberic identifier of the disk pool
(including – and _) that you want to set to a
Complete state. Enclose the diskPoolName in
square brackets ([ ]).
Advertisement
Table of Contents
