Table of Contents
Advertisement
Parameter
physicalDiskType
physicalDisk or physicalDisks
summary
Show Physical Disk Channel Statistics
Description
This command shows cumulative physical disk channel data transfer and error information. If the RAID
controller module has automatically degraded a channel, this command also shows interval statistics.
When using this command, you can display information about one specific physical disk channel, several
physical disk channels, or all physical disk channels.
Syntax
show (physicalDiskChannel [(1 | 2)] |
physicalDiskChannels [1 2] | allPhysicalDiskChannels) stats
Parameters
Parameter
physicalDiskChannel
physicalDiskChannels
allPhysicalDiskChannels
328
Description
The type of physical disk for which you want to
retrieve information. The valid physical disk type is
SAS.
Identifies the enclosure and slot where the physical
disk resides. You can enter enclosure IDs and slot
IDs for one or several physical disks. Enclosure ID
values are 0 to 99. Slot ID values are 0 to 31. You
must put parentheses around the enclosure ID
values and the slot ID values.
Returns the status, capacity, data rate, product ID,
and firmware version for the specified physical
disks.
NOTE: To determine the type of physical disk
in a specific location, use the physicalDisk
parameter, and enter the enclosure and slot
IDs for the physical disk.
Description
Identifier number of the physical disk port for
which to display information. Valid physical disk
port values are 1 or 2. You must put brackets ([ ])
around the physical disk channel values.
Identifier number of the physical disk ports for
which to display information. Valid physical disk
port values are 1 or 2. You must put brackets ([ ])
around the physical disk channel values.
The identifier that selects all of the physical disk
ports.
Advertisement
Table of Contents
