Table of Contents
Advertisement
Notes
The SSD cache can contain any number of SSDs. The maximum size of the SSD cache is 5 TB, but might
be less depending on the size of the RAID controller module's primary cache.
Add Virtual Disk To Remote Replication Group
Description
This command adds a primary virtual disk to a remote replication group. This command is valid only on
the local storage array that contains the remote replication group to which you want to add the primary
virtual disk. A remote replication group has a repository volume that is used to save data for all of the
point-in-time images that are part of the remote replication group.
Syntax
add virtualDisk="virtualDiskName"
asyncRemoteReplicationGroup="asyncRemoteReplicationGroupName"
remotePassword="password"
(repositoryVirtualDisk="repos_xxxx" | repositoryVirtualDisk=(diskGroupName
[capacity=capacityValue]) repositoryVirtualDisk=(diskPoolName
[capacity=capacityValue]))
Parameters
Parameter
virtualDisk
asyncRemoteReplicationGroup
remotePassword
repositoryVirtualDisk
Description
The name of the primary virtual disk that you want
to add to the remote replication group. Enclose
the virtual disk name in double quotation marks ("
").
The name of the remote replication group that will
contain the member virtual disk that you want to
add. Enclose the remote replication group name in
double quotation marks (" ").
This parameter is optional. Use this parameter
when the remote storage array is password
protected. Enclose the password in double
quotation marks (" ").
The name of the repository virtual disk that will
contain the remote replication group.
You have two options for defining the name of a
repository virtual disk:
•
Use an existing repository virtual disk name.
•
Create a new repository virtual disk when you
run this command.
The name of an existing repository virtual disk is
comprised of two parts:
139
Advertisement
Table of Contents
