Interaction With Other Premium Features; Standard Remote Replication Commands - Dell PowerVault Manual

Interaction With Other Premium Features

You can run the Remote Replication premium feature while running these premium features:
• Snapshot—both standard Snapshot and Snapshot (legacy) premium features
• Virtual Disk Copy
When you run the Remote Replication (legacy) premium feature with other premium features, you must
consider the requirements of the other premium features to ensure that you set up a stable storage array
configuration.
For more information on using Remote Replication with other premium features, see the Administrator's
Guide.

Standard Remote Replication Commands

The following Remote Replication commands are also available. For more information, see
Listed Alphabetically.
Table 13. Standard Remote Replication Commands
Command
stop asyncRemoteReplicationGroup
rolechange
check asyncRemoteReplicationGroup
repositoryConsistency
clear asyncRemoteReplicationFault
check storageArray connectivity
remove asyncRemoteReplicationGroup
incompleteRemoteReplication
reset storageArray arvmStats reset
storageArray iscsiIpAddress
show asyncRemoteReplicationGroup
synchronizationProgress
show asyncRemoteReplicationGroup
summary
Description
Cancels a pending primary/secondary storage
array role reversal.
Reports information on data in the repository
virtual disks.
Clears an remote replication "sticky" fault from a
replication group(s) and/or member virtual disk.
Verifies the local and the remote storage arrays
have a valid communication path.
Removes an orphaned replicated pair virtual disk.
Resets IP address for the remote storage array to
re-establish connection with the local storage
array or resets synchronization statistics for
member virtual disks to relative 0.
Shows progress of periodic synchronization of the
replication group as a percentage.
Shows configuration information for one or more
replication groups.
Commands
95