•
The persistent registration information and the persistent reservation
information
•
Detailed information about the current status of the storage array
•
The diagnostic data for the physical disk
•
A recovery profile for the storage array
•
The unreadable sectors that are detected on the storage array
•
The state capture data
•
An inventory of the versions of the firmware running on the RAID
controller modules, the physical disks, and the RAID controller modules
Syntax
save storageArray supportData file="filename"
Parameter
Parameter
file
Set Disk Group
This command defines the properties for a disk group.
Syntax
set diskGroup [diskGroupName]
addPhysicalDisks=(enclosureID1,slotID1
enclosureID2,slotID2 ... enclosureIDn,slotIDn)
Parameters
Parameter
diskGroup
Description
Name of the file to which to save the storage array
support-related data. You must put quotation marks
(" ") around the file name.
Description
Sequence number of the disk group for which to set properties.
You must put brackets ([ ]) around the disk group number.
Script Commands
187