Optional Components; Figure 1-4 Processor Fans And Heat Sink Assemblies On A Replacement System Board - Sun Microsystems Netra 240 Service Manual

Processor Fans and Heat Sink Assemblies on a Replacement System Board
FIGURE 1-4
Note – The Netra 240 server comes installed with heat sink assemblies, and no
processor fans, on the system board(s). However, processor fans and heat sink
assemblies are present on a field-replaceable system board assembly. See
Appendix A
page 95
installation.

Optional Components

TABLE 1-2
lists the order numbers of the optional PCI cards.
Note – The list of optional components might be updated at any time. Refer to the
Sun Store
240 server supported components.
6 Netra 240 Server Service Manual • June 2004
for system board FRU part numbers and
for instructions on removing the processor fans during system board
lists the order numbers of the optional server components, and
SM
web site (http://store.sun.com) for the most current list of Netra
Processor fans and
heatsink assemblies
System board assembly
"Installing a System Board" on
TABLE 1-3