GE Security Concord 4 Installation Manual page 148

138 Concord 4
Installation Manual
Table 21. Hardware devices
Part no.
60-836
60-777-01
600-1025-01-95R
60-764-01-95R
600-1019
60-756
60-757
60-758
60-774
60-770
60-620-01*
60-850
60-850-01
60-861
60-677*
60-783-02*
60-528
13-060
Total power consumption:
Total power consumption not to exceed:
* These devices not listed, investigated, or verified by UL.
** UL listing applied for.
† Listed, but not tested for compatibility by UL.
†† Total current only for all 2-wire smoke detectors connected to panel 2-wire smoke loop.
Note: When installing SuperBus 2000 RF receiver modules, the antenna tamper feature must be set to off. (see
global settings
Description
Voice only module (with current jumper installed) (with
current jumper removed)
Phone interface/voice module
RF transceiver
RF receiver
2-amp power supply
4 input/2 output SnapCard
8Z hardwired zone expander SnapCard
4 output SnapCard
Hardwired input module
Hardwired output module
Energy saver module
Cellular backup module (standard power)
Cellular backup module (high power)
Wireless gateway-ready kit
Interrogator 200 audio verification module
Automation module
Hardwired interior speaker
15-watt speaker
on page 73).
Qty. mA (max.)
600mA
600 mA
55 mA
35 mA
N/A
185 mA
230 mA
130 mA
35 mA
180 mA
20 mA
1600 mA
1900 mA
1600 mA
10 mA
35 mA
500 mA
Subtotal
mA
1,000 mA
Reporting -