Options Menu - GE Security Concord 4 Installation Manual

108 Concord 4
Installation Manual

Options menu

The Options menu lets you set up the system for downloading and silent arming. You can also adjust
alphanumeric touchpad display brightness from this menu
Downloading (041)
Default setting is On.
When this setting is on, the panel can communicate with Enterprise Downloader software for programming the
system from offsite.
Note: For this feature to work, the panel must be connected to a phone line and be programmed with Remote access on, with
a Downloader phone number, and with a Downloader code.
To turn the setting off or on, do the following:
1. Press A or B until the display shows OPTIONS. Press #, then A or B until the display shows
DOWNLOADING OFF/ON (current setting).
2. Press 1 (off) or 2 (on). The display flashes the entered selection. Press # and the display shows the new
setting.
Touchpad brightness (043)
Default setting is 2.
This setting lets the user lighten or darken the background on touchpad displays. Each touchpad can be set to
compensate for lighting conditions in the touchpad location.
To adjust touchpad brightness, do the following:
1. Press A or B until the display shows OPTIONS.
2. Press #, then A or B until the display shows TOUCHPAD BRIGHTNESS n (current setting).
3. Enter a setting from 0 (darkest background) to 3 (brightest background). The display flashes the
entered selection. Press # and the display shows the new setting.
Volume (044)
Default setting is 4.
This setting determines the volume level of status sounds from speakers connected to the phone interface/voice
module or voice only module (VOM).
Note: This menu appears only if a phone interface/voice module or a VOM is connected to the panel.
To adjust status sound volume, do the following:
1. Press A or B until the display shows OPTIONS, then press #.
2. Press A or B until the display shows VOLUME n (current setting).
3. Enter a setting from 0 (off) to 7 (loudest). The display flashes the entered selection. Press # and the
display shows the new setting.