GE Security Concord 4 Quick Manual

Hide thumbs Also See for Concord 4:

Table of Contents

Download this manual See also: Installation Manual

Quick Guide:

For a detailed review of the entire system, please view the

Arm and Disarm

Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press [3] and enter your



[security code].

To arm all sensors in STAY mode when you are not leaving the premises, press [2] and enter your



[security code].

Disarm:

To disarm, enter your [security code] + [1].



GE Security Concord 4

Concord 4 system manual.

Table of Contents

Do you have a question about the Concord 4 and is the answer not in the manual?

Page 1 Quick Guide: GE Security Concord 4 For a detailed review of the entire system, please view the Concord 4 system manual. Arm and Disarm Arm: To arm all sensors in AWAY mode when you are leaving the premises, press [3] and enter your ...
Page 2 Battery The Concord 4 operates on a UB 1270 battery.  Loss of AC power and use of backup battery power is indicated by NO AC.  A low battery condition is indicated by BAT.  For instructions on replacing your battery, please visit our Battery Replacement Page.
Page 3 New users can be assigned attributes, which define what actions users can and cannot perform. For a complete list of user attributes, please see the Concord 4 system manual. Trouble Conditions Trouble conditions are issues that require your attention and are indicated by rapid beeps sounding every minute until the Trouble Condition is corrected.
Page 4 For a list of possible Trouble Conditions, please see the Concord 4 system manual.  Volume You can adjust the system status voice volume level at which system status messages are announced. To adjust the system status voice volume, press [9] + [Master code] + [0] + [4] + [3].