GE Security Concord 4 Installation Manual page 117

Partition assign (030nnn5 where nnn = user number 000 to 229)
Default setting is Ptn 1.
This setting determines which partitions a user code can access. A code can be assigned to all partitions if
desired, making it usable at any touchpad in any partition and able to jump to any selected partition.
To assign partitions to a user code, do the following:
1. With the display showing USER CODES, press # and the display shows REGULAR USER CODES.
2. Press # and the display shows USER nn (first available user number).
3. Press A or B to select the user number, then press #. The display shows USER nnn - nnnn.
4. Press A or B until the display shows PARTITION ASSIGN (current setting).
5. Enter the desired partitions (1 to 6). The display flashes the entered numbers. Press # and the numbers
stop flashing.
Partition master (0310 to 0315)
Default setting is None.
The partition master code provides access to all system operations and user programming for a single partition.
You must be in the partition of the partition master code you wish to change.
To change the partition master code, do the following:
1. With the display showing USER CODES, press # then A or B until the display shows
MASTER CODE
2. Press # and the display shows PARTITION nnnn (current code).
3. Enter a new four-digit code. The display flashes the entered code. Press # and the display shows the
new code.
System master (0320)
Default setting is 1234.
The system master code provides access to all system operations and user programming.
Note: In the partition where the indicating power device is located, only the system master code may be enabled to disarm
that partition.
To change the system master code, do the following:
1. With the display showing USER CODES, press # then A or B until the display shows SYSTEM
MASTER CODE.
2. Press # and the display shows SYSTEM MASTER nnnn (current code).
3. Enter a new four-digit code. The display flashes the entered code. Press # and display shows the new
code.
.
Chapter 3 107
Programming
PARTITION