Unit Of Measure - Standard Horizon MATRIX GX2100 Owner's Manual

12.8 UNIT OF MEASURE

Allows Navigation and AIS displays to be shown in "Knot", "Mile/Hour" or "Kilo-
Meter/Hour" (for speed) and "Nautical Mile" or "Kilo-Meter" (for distance).
A GPS must be connected to the radio to be able to show SPEED and
DISTANCE.
1. Press and hold down the [ CALL ( MENU )] key until
"Setup Menu" appears, then select "GENERAL SETUP"
with the CHANNEL knob.
2. Press the [ SELECT ] soft key, then rotate the CHAN-
NEL knob to select "UNIT OF MEASURE".
3. Press the [ SELECT ] soft key.
4. Rotate the CHANNEL knob to select "SPEED" or "DIS-
TANCE" which you wish to change.
5. Press the [ SELECT ] soft key, then rotate the CHAN-
NEL knob to select desired unit. Available selections
are KTS (knot), MPH (Mile/Hour), or KMH (Kilo-
Meter/Hour) for speed, and NH (Nautical Mile) or
KM (Kilo-Meter) for distance.
6. Press the [ ENT ] soft key to store the selected set-
ting.
7. Press the [ QUIT ] soft key several times to return to
radio operation.
GX2000/GX2100
NOTE
Page 85