Setting Up The Individual Call Reply; Acknowledgment - Standard Horizon HX890E Owner's Manual
Class-h dsc gps transceiver
Hide thumbs
Also See for HX890E:
- Owner's manual (116 pages) ,
- Firmware update instruction manual (5 pages)
Table of Contents
Advertisement
8. After the ninth character has been entered, press the [FINISH] soft key.
9. To store the entered data, press the [CH▼] key to select
"SAVE", then press the [SELECT] soft key.
10. To enter another individual address, repeat steps 1 through 9.
11. Press the [CLR] key to return to radio operation.
10.4.2 Setting up the Individual Call Reply
This menu item sets up the radio to automatically, or manually (default setting)
respond to a DSC individual call requesting you to switch to a working channel
for voice communications. When "MANUAL" is selected the MMSI of the call-
ing vessel is shown allowing you to see who is calling. This function is similar
to caller id on a cellular phone.
Press and hold
key
1. Press the [CH▼]/[CH▲] key to select "AUTO" or "MANU-
AL".
2. Press the [ENTER] soft key to store the selected setting.
3. Press the [CLR] key to return to radio operation.
10.4.3 Enabling the Individual Call Acknowledgment
When the individual reply setting (described in the previous section) is set to
"AUTOMATIC", the transceiver reply message can be set to "ABLE" (default
setting) or "UNABLE".
Press and hold
key
1. Press the [CH▼]/[CH▲] key to select "ABLE" or
"UNABLE".
2. Press the [ENTER] soft key to store the selected setting.
3. Press the [CLR] key to return to radio operation.
DSC SETUP
(
/
key)
DSC SETUP
(
/
key)
SELECT
INDIVIDUAL REPLY
(
key)
(
SELECT
INDIVIDUAL ACK
(
(
key)
INDIVIDUAL DIR.
NAME:
STANDARD---------
MMSI:
987654321
Saved
BACK
SELECT
/
key)
(
DSC SETUP
INDIVIDUAL REPLY
AUTO
MANUAL
BACK
SELECT
/
key)
(
DSC SETUP
INDIVIDUAL ACK
ABLE
UNABLE
BACK
ENTER
key)
ENTER
key)
ENTER
41
Advertisement
Table of Contents
