15.7 AUTO POS POLLING
The HX890 has the capability to automatically track seven vessels programmed
into the individual directory.
Refer to section "10.8 AUTO POS POLLING" for details.
15.8 AUTO POS INTERVAL
The auto position polling time interval between position request transmissions,
may be programmed into the individual directory setup.
Refer to section "10.8.1 Setting up the Polling Time Interval" for details.
15.9 CHANNEL SWITCH TIMER
When a DSC Distress Alert or an all ships (urgency or safety) call is received,
the HX890 will automatically switch to Channel 16.
This menu selection allows the automatic switch time to be changed. The
default selection is 30 seconds.
Press and hold
key
1. Press the [CH▼]/[CH▲] key to select the desired time,
then press the [ENTER] soft key.
2. Press the [CLR] key to return to radio operation.
When the "OFF" is selected, "
15.10 NO ACT (ACTION) TIMER
If no key is pressed during the "MENU" or "DSC CALL" setup screen, the HX890
will automatically return to radio operation.
The default selection is 15 minutes.
Press and hold
key
1. Press the [CH▼]/[CH▲] key to select the desired time,
then press the [ENTER] soft key.
2. Press the [CLR] key to return to radio operation.
DSC SETUP
(
/
key)
C
" icon will light up on the screen.
DSC SETUP
(
/
key)
SELECT
CH SWITCH TIMER
(
key)
(
SELECT
NO ACT TIMER
(
(
key)
SELECT
/
key)
(
DSC SETUP
CH SWITCH TIMER
OFF
10sec
30sec
1min
2min
BACK
16
USA
HI
RX
P
P-SET
DISTRESS
C
VOL
LAT
33 ° 37.1200
LON
118 ° 09.5822
TIME
LOC 09:56:56
SELECT
/
key)
(
DSC SETUP
NO ACT TIMER
1min
3min
5min
10min
15min
BACK
key)
ENTER
N
W
AM
key)
ENTER
87