General Errors; General Error Messages - Sun Microsystems IB Switch 9P Administration Manual

Additional Important Messages (Continued)
TABLE A-7
Message
Are you sure you want to power off
FRU %s (y/n)?:
Event log is empty.
Are you sure you want to remove %s
(y/n)?:
Are you sure you want to restore the
SC to factory defaults? All dynamic
FRUID and NVRAM container data will
be regenerated (y/n)?
Use of factory-mode is strictly
reserved for SUN Service Personnel.
Unauthorized use may invalidate your
service warranty. Do you wish to
continue [n]?
Warning: Are you sure you want to
flashupdate the SSC0/SC flash image
(y/n)?
Are you sure you want to reset the
SC? All user sessions will be lost
(y/n)?

General Errors

TABLE A-8

General Error Messages

TABLE A-8
Error Message
Error adding user username
Error: Cannot delete admin user
Error changing password for username
Description
poweroff confirmation.
No messages are in the event log.
removefru confirmation.
Restore factory defaults confirmation.
Comment: A command reserved for Sun service
personnel attempted. User must answer 'n', that is, not
continue.
flashupdate confirmation.
resetsc confirmation.
lists general errors that ALOM reports.
Command/Description
An error occurred during execution of the useradd
command. This message is followed by a more detailed
message that explains the nature of the error.
You tried to delete the admin user account from ALOM.
ALOM does not enable you to delete this account.
An error occurred during execution of the userpassword
command. This message is followed by a more detailed
message that explains the nature of the error.
Appendix A Troubleshooting 69