Sun Microsystems IB Switch 9P Administration Manual page 93

Syslog Messages (Continued)
TABLE A-3
Message
IBSRM_EVENT_MISC_EMPTY_SUBNET,
local GUID GUID-value
IBSRM_EVENT_MISC_BAILOUT, reason
= reason, file source-file, line source-
line
IBSRM will not write to journal
IBSRM_EVENT_MISC_PORT_ADD_DDP_FAI
LED, port_GUID = port-GUID
IBSRM_EVENT_MISC_PORT_ADD_DDP_DON
E, port_GUID = port-GUID
Severity Description
The IB subnet that the local switch
Information
GUID-value is part of is currently empty.
(No hosts are connected or yet done
booting.)
The IB management software running
Error
on the switch is bailing out. The bailout
point in the source is identified by
source-file and source-line. The reason for
the bailout is indicated by reason, 1 is
lack of memory, 2 is package transfer
errors, 3 is other.
The IB switch will try to automatically
restart the IB management software
when this event occurs. If the event
recurs after the restart, contact service.
This message is expected on each IB
Information
management (re)start on the switch and
does not indicate any error. It is simply
an indication that the switch does not
support stable storage to save IB
management policy and configuration
information.
An attempt to auto-add the port
Warning
port-GUID to the default data partition
(DDP) failed. This will cause failures in
data transfers to and from this port,
which uses the default data partition.
The port port-GUID has been auto-added
Information
to the default data partition. This port
had previously failed to be added to the
DDP because of a full PKey table.
However, the removal of the port from
some other partition has freed up an
entry in the PKey table which allowed
the auto-add to the DDP.
Appendix A Troubleshooting 63