Sun Microsystems IB Switch 9P Administration Manual page 91

Syslog Messages (Continued)
TABLE A-3
Message
IBSRM_EVENT_PORT_BAD_MKEY, src
GUID = source-port-GUID,
dest GUID = destination-port-GUID,
attr_ID = attribute-ID,
method = method
IBSRM_EVENT_PORT_BAD_PKEY, src
GUID = source-port-GUID,
dest GUID = destination-port-GUID,
PKey = PKey-value,
src qp = source-QP-number,
dest qp = destination-QP-number
IBSRM_EVENT_PORT_BAD_QKEY, src
GUID = source-port-GUID, dest GUID =
destination-port-GUID, qkey = QKey-
value, src qp =
source-QP-number, dest qp =
destination-QP-number
IBSRM_EVENT_PORT_PKEY_TABLE_FULL,
port_GUID = port-GUID,
PKey = PKey-value
IBSRM_EVENT_NODE_DISC_FAILED,
port_GUID =port-GUID
Severity Description
The IB port destination-port-GUID has
Warning
received a package from source-port-
GUID that has a bad MKey value.
attribute-ID and method describe the type
of packet received. The packet has been
dropped. Check to ensure that no
unexpected IB devices are connected to
this IB network.
The IB port destination-port-GUID has
Warning
received a package from source-port-
GUID that has a bad partition key PKey-
value. The packet will be dropped.
source-QP-number and destination-QP-
number further describe this packet. The
packet has been dropped. Check to
ensure that no unexpected IB devices are
connected to this IB network.
The IB port destination-port-GUID has
Warning
received a package from source-port-
GUID that has a bad QKey value QKey-
value.The packet will be dropped.
source-QP-number and destination-QP-
number further describe this packet. The
packet has been dropped. Check to
ensure that no unexpected IB devices are
connected to this IB network.
Warning The PKey PKey-value could not be
written into the PKey table of the IB port
identified by port-GUID because the
table was already full. The port will not
be able to participate in transmissions
involving this PKey. This should not
happen unless there are many
simultaneously running IB services in
the IB subnet.
Warning Even after several attempts, one or more
devices attached to the node identified
by port-GUID could not be discovered.
The device is not able to participate in
any data transfers. Check cabling and
connections. If cabling seems to be OK
reboot the device.
Appendix A Troubleshooting 61