Sun Microsystems IB Switch 9P Administration Manual page 85

Sample Output of showlogs Command (Continued)
CODE EXAMPLE A-1
Jan 01 00:00:06: MINOR: SSC0: Service Required LED state changed
to OFF.
Jan 01 00:00:06: MINOR: SSC0: Locator LED state changed to OFF.
Jan 01 00:00:03: MINOR: SSC0: Environmental monitoring enabled.
Jan 01 00:00:06: MINOR: SSC0: Active LED state changed to ON.
Jan 01 00:00:06: MINOR: SSC0: Service Required LED state changed
to OFF.
Jan 01 00:00:06: MINOR: SSC0: Locator LED state changed to OFF.
Jan 01 00:01:58: MAJOR: Factory commands Enabled
Jan 01 00:00:03: MINOR: SSC0: Environmental monitoring enabled.
Jan 01 00:00:06: MINOR: SSC0: Active LED state changed to ON.
Jan 01 00:00:06: MINOR: SSC0: Service Required LED state changed
to OFF.
Jan 01 00:00:06: MINOR: SSC0: Locator LED state changed to OFF.
Jan 04 16:32:22: MINOR: SSC0: Service Required LED state changed
to ON.
Jan 04 16:32:39: MINOR: SSC0: Service Required LED state changed
to OFF.
Nov 30 11:28:42: MINOR: SSC0: Locator LED state changed to
FLASHING.
Nov 30 11:28:54: MINOR: SSC0: Locator LED state changed to OFF.
----------------------------------------------------------------
--------------
Boot and loopback log
----------------------------------------------------------------
--------------
JAN 01 00:00:03: MAJOR: SSC0: Port 0: SC loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 1: SC loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 2: SC loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 3: SC loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 4: SC loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 5: SC loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 6: SC loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 7: SC loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 8: SC loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 0: Internal loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 1: Internal loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 2: Internal loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 3: Internal loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 4: Internal loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 5: Internal loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 6: Internal loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 7: Internal loopback test failed
JAN 01 00:00:03: MAJOR: SSC0: Port 8: Internal loopback test failed
sc>
2. Repeat the sequence of commands or other actions that led to the error.
Appendix A Troubleshooting 55