Showplatform Command Options; To Use The Showsc Command - Sun Microsystems IB Switch 9P Administration Manual

Using the -v option returns information similar to the following:
sc> showplatform -v
FRU Status
-------- -------------
--
SSC0 OK
PS0 OK
PS1 OK
Domain Status
-------- ------------------- ----------------- ---------------
SSC0/SC OS Running (Active)
sc>

showplatform Command Options

The showplatform command uses three options.
showplatform Command Options
TABLE 3-12
Option
-v
frulist
showsc
Use the showsc command to display information about the software configuration
and firmware version.
▼

To Use the showsc Command

Note – You do not need user permissions to use this command.
●
Do one of the following:
Type
--------------------
Sun IB Switch 9P
POWER SUPPLY, A188
POWER SUPPLY, A188
MAC Address
00:03:ba:7a:a1:76
Description
Displays the part and serial numbers as well as status and type.
Displays information for the given FRUs.
Part No.
--------
5957467
3001650 000031
3001650 000044
Hostname
Chapter 3 Command-Line Reference
Serial No.
--------
000011
45