Accessing The Command-Line Interface; To Access The Cli - Sun Microsystems IB Switch 9P Administration Manual

6. To access all the ALOM commands, set the password for the admin user:
sc> password
Enter new password: type your password
Enter new password again: type your password again
New password set for user admin successfully
sc>

Accessing the Command-Line Interface

The Sun IB switch uses the ALOM command-line interface (CLI).
▼

To Access the CLI

1. Log in as admin and enter in the password you just set up:
Sun Advanced Lights Out Manager for Sun IB Switch 9P
Copyright 2003-2005 Sun Microsystems, Inc. All Rights Reserved.
ALOM-B 1.2
username: admin
password:
2. Use the setdate command to synchronize the switch with the time at your site:
sc> setdate mmddHHMMccyy.SS
Note – ALOM uses Coordinated Universal Time (UTC). ALOM does not accept time
zone conversions or daylight time changes.
You can use all the setdate command options or just set the time:
This example sets the time to August 30, 2005, at 11:28 (11:28 AM)
■
(Coordinated Universal Time).
sc> setdate 083011282005
Tue Aug 30 11:28:03 UTC 2005
Chapter 2 Initial Configuration 7