Sun Microsystems IB Switch 9P Administration Manual page 38

■
sc> setdate 1128
Tue Aug 30 11:28:03 UTC 2005
3. Type help at the sc> prompt to get a list of the valid CLI commands.
sc> help
flashupdate [-v] [-y] [-F] -s IPaddress -f pathname
help [command]
logout
password
poweroff [-y] [-f] [-r] [-F] {frulist}
poweron [-F] {frulist}
removefru [-y] [-f] [-F] {frulist}
resetsc [-y][-F]
setbp [-i]
setdate [mmdd]HHMM[.SS] | mmddHHMM[cc]yy[.SS]
setdefaults [-y]
setlocator {on|off}
setupsc
showbp [-r]
showdate
showenvironment [-v] [{frulist}]
showfru {frulist}
showib [-v]
showlocator
showlogs [-b lines | -e lines | -v] [-g lines] [-t] {frulist}
showplatform [-v] [{frulist}]
showsc
showusers
useradd username
userdel username
userpassword username
userperm username [a] [u] [c] [r]
usershow [username]sc>
See Chapter 3
4. Install and set up the system log (syslog) proxy.
See "Installing and Setting Up the System Log Proxy" on page 9
8 Sun IB Switch 9P Administration Guide • October 2006
This example sets the time to 11:28 (11:28 AM) of the current month, day, and
year (Coordinated Universal Time).
for a full description of the CLI commands.
for instructions.