To Use The Userdel Command; To Use The Userpassword Command - Sun Microsystems IB Switch 9P Administration Manual

userdel
Use the userdel command to delete a user account. Once the account is deleted,
the deleted user's configuration information can never be recovered.
If the user name you specify is not on the list of users, the system returns an error
message. Likewise, if there is only one user on the list, you cannot delete that user
account.
Note – You cannot delete the default admin user account.
▼

To Use the userdel Command

Note – You must have u level user permission to use this command. See
"userperm" on page 49
●
At the sc> prompt, type the following command:
sc> userdel username
where username is the name of the user account you want to delete.
userpassword
Use the userpassword command to change the password for the specified user
account. This command is for administrators who must change user passwords, but
who might not know what the user account passwords are. If you are trying to
change the password on your own account, use the password command. See
"password" on page
▼

To Use the userpassword Command

Note – You must have u level user permission to use this command. See
"userperm" on page 49
●
At the sc> prompt, type the following command:
sc> userpassword username
48 Sun IB Switch 9P Administration Guide • October 2006
for information on setting user permissions.
19.
for information on setting user permissions.