Sun Microsystems IB Switch 9P Administration Manual page 90

Table of Contents

Advertisement

Syslog Messages (Continued)
TABLE A-3
Message
IBSRM_EVENT_PORT_STATE_CHANGED,
port with GUID = port-GUID,
ib port = IB-port-number,
connector = connector-number,
new_state = new-state-value,
old_state = old- state-value
IBSRM_EVENT_PORT_BAD_DIAG_CODE,
port_GUID = port-GUID,
diag_code = diag-code-value
IBSRM_EVENT_PORT_LINK_INTEG_REACH
ED, port_GUID = port-GUID
IBSRM_EVENT_PORT_EXCESS_BUFF_OVER
RUN, port_GUID = port-GUID
IBSRM_EVENT_PORT_FLOW_CNTL_TIMER_
EXPD, port_GUID = port-GUID
IBSRM_EVENT_PORT_CAP_MASK_CHANGED
, port_GUID = port-GUID,
cap_mask = capability-mask
IBSRM_EVENT_PORT_SYS_IMG_GUID_CHA
NGED, port_GUID = port-GUID,
sys_im_GUID = system-image-GUID
60
Sun IB Switch 9P Administration Guide • October 2006
Severity
Description
Information
The IB port identified by port-GUID,
port-number and connector-number has
changed the IB port state from
old-state-value to new-state-value. The
state values can be decoded as follows:
1 = Down
2 = Initialize
3 = Armed
4 = Active
This message is often seen together with
the _ONLINE and _OFFLINE messages.
Error
The IB port identified by port-GUID has
reported a bad diagnostic code diag code
value. The port will not be become
operational. Reboot the device to see if it
recovers.
Error
This is an error event causing the IB port
identified by port-GUID to have poor
performance. Check that the cables are
properly inserted. If cables are properly
inserted, try rebooting the device.
Error
This is an error event causing the IB port
identified by port-GUID to have poor
performance. Check that the cables are
properly inserted. If it does not help, try
rebooting the device.
This is an error event causing the IB port
Error
identified by port-GUID to have poor
performance. Check that the cables are
properly inserted. If cables are properly
inserted, try rebooting the device.
Information
The IB port identified by port-GUID has
had a change in IB capabilities. The new
port capabilities are identified by the
value of the capability mask.
Information
The system image GUID of IB port
identified by
port-GUID has changed to system-image-
GUID

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IB Switch 9P and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents