Preface
This Sun™ IB Switch 9P Administration Guide describes how to configure the Sun IB
switch. This book is intended for experienced network administrators who have a
working knowledge of local area network operations and familiarity with InfiniBand
technology.
Before You Read This Book
To fully use the information in this document, you must first install the Sun IB
switch, using the Sun™ InfiniBand Switch Nine Port Hardware Installation Guide.
How This Book Is Organized
Chapter 1
provides an overview of the Sun IB switch hardware and software,
including the hardware and software requirements for using the switch.
Chapter 2
describes how to set up and boot the switch, and how to access the
command-line interface (CLI).
Chapter 3
describes the CLI commands.
Appendix A
provides information about troubleshooting problems.
Appendix B
provides the technical specifications for the Sun IB switch.
Appendix C
describes how to set up a TFTP server and update the firmware.
Appendix D
describes how to set up a blueprint for your switch topology.
xxvii
Need help?
Do you have a question about the IB Switch 9P and is the answer not in the manual?