To Use The Showdate Command; To Use The Showenvironment Command - Sun Microsystems IB Switch 9P Administration Manual

showdate
Use the showdate command to show the current ALOM date and time.
Note that the time shown is Coordinated Universal Time (UTC). Use the setdate
command to synchronize the time with your site.
▼

To Use the showdate Command

Note – You do not need user permissions to use this command.
●
At the sc> prompt type the following command:
sc> showdate
For example:
sc> showdate
Thu Mar 03 22:06:43 UTC 2005
To change the ALOM date and time, use the setdate command. See
page
showenvironment
Use the showenvironment command to display a snapshot of the switch's
environmental status.
▼

To Use the showenvironment Command

Note – You do not need user permissions to use this command.
●
At the sc> prompt, type the following command:
sc> showenvironment
32 Sun IB Switch 9P Administration Guide • October 2006
26.
"setdate" on