Sun Microsystems IB Switch 9P Administration Manual page 67

Sample of the showfru Command (Continued)
CODE EXAMPLE 3-7
/Power_SummaryR/Total_Time_On: 29992
/Power_SummaryR/Total_Power_Ons: 38
/Power_SummaryR/Total_Power_Offs: 0
SEGMENT: TH
/Temperature_HistoryR/UNIX_Timestamp32: Thu Mar 03 21:40:45 UTC
2005
/Temperature_HistoryR/Sensor: 0x0
/Temperature_HistoryR/Lowest: 19
/Temperature_HistoryR/Highest: 24
/Temperature_HistoryR/Latest: 20
/Temperature_HistoryR/Histogram(10 iterations)
/Temperature_HistoryR/Histogram[0]: 0
/Temperature_HistoryR/Histogram[1]: 524
/Temperature_HistoryR/Histogram[2]: 0
/Temperature_HistoryR/Histogram[3]: 0
/Temperature_HistoryR/Histogram[4]: 0
/Temperature_HistoryR/Histogram[5]: 0
/Temperature_HistoryR/Histogram[6]: 0
/Temperature_HistoryR/Histogram[7]: 0
/Temperature_HistoryR/Histogram[8]: 0
/Temperature_HistoryR/Histogram[9]: 0
SEGMENT: ST
/Status_CurrentR/UNIX_Timestamp32: Mon Feb 14 21:50:27 UTC 2005
/Status_CurrentR/Status: 0x0
showib
Use the showib command to display InfiniBand switch status. Two sections of
information are displayed. The first section contains the InfiniBand topology
information, that is, which host channel adapter (HCA) is connected to the various
switch ports. The second section contains information related to the local switch
ports.
In a multi-switch topology, only the switch controlling the IB setup will display the
first section
Chapter 3 Command-Line Reference 37