Annotation Setup Menu; Camera Setup Menu - Sony Ipela PCS-XG80 Operating Instructions Manual

4
Open the SPID page (ID page) to enter
the SPID.
The SPID is generally comprised of 12
digits, including a 7 digit LDN (Local
Directory Number). Be sure to enter the
different SPID number in each of the A1
and A2 (B1 and B2, C1 and C2,
depending on the number of lines you
use) text boxes if you have entered the
separate LDNs in the Local Number text
boxes for each channel in step 3.
For the AT&T 5ESS (National
ISDN) switch type
Enter the SPID in the A1 text box
only.
For the NTI DMS-100 (National
ISDN), NTI DMS-100 (Custom
ISDN), AT&T 5ESS (National ISDN)
switch type
Enter the different SPID numbers in
the A1 and A2 text boxes.
For the AT&T 5ESS (Point-to-Point
Custom ISDN) switch type
You do not need to set up the SPID,
then no entry in the A1 and A2 (B1
and B2, C1 and C2, depending on the
number of lines you use) is required.
5
After the settings are completed,
select "Save", then press the ENTER
button.

Annotation Setup Menu

The Annotation setup menu is used for the
annotation function allowing you to write
letters or graphics on the screen using a pen
tablet.
Annotation
Annotation
Enable
Allows you to select whether the annotation
function is enabled.
On: Enables the annotation function.
Off: Disables the annotation function.
Color
Allows you to select the color of the letters
or graphics written on the screen with a pen
tablet.
You can select from among "Black", "Red",
"Blue", "Green", "Yellow", "Orange",
"Purple" and "White".
Line Density
Allows you to select the density of the line
written on the screen with a pen tablet.
You can select from among "Thick",
"Medium" and "Narrow".

Camera Setup Menu

Camera
Camera
Bright Face
Allows you to select the level of the Bright
Face feature.
You can select from among "Off", "High",
"Medium" and "Low".
Noise Reduction Filter
Allows you to select the level of the noise
reduction filter.
You can select from among "High",
"Medium", "Low" and "Off".
Second Camera Input
Allows you to select the input connector on
the Communication System to which the
second camera is connected.
RGB: Connects the second camera to the
RGB IN connector.
YPbPr: Connects the second camera to the
VIDEO IN YPbPr jacks.
S VIDEO: Connects the second camera to
the S VIDEO IN connector.
Image Flip for First Camera
Allows you to select whether to rotate the
camera image 180 degrees when the first
camera is installed on a ceiling.
Off: Does not rotate the image 180 degrees.
Flip Vertical: Rotates the image 180
degrees.
Registering Local Information
69