Calling a Remote Party Using the One-Touch Dial Buttons
For registration of the one-touch dial buttons, see "Registering a Remote
Party – Phone Book" on page 102.
1
Open the Home menu and select the one-touch dial button in which the
remote party you want to call is registered with one of the F1 to F4 buttons
or with the V, v, B or b button and ENTER button on the Remote
Commander.
The submenu appears.
Home
Camera
Tools
History
Phone Book
Detailed Dial
2
Use the V, v, B or b button on the Remote Commander to select "Dial",
then press the ENTER button.
The system begins dialing the selected remote party. "Dialing" appears on
the monitor screen. When the system connects to the remote system,
"Session Connected" appears on the screen and the picture on the remote
site is displayed. Now you can start communication with the remote party.
92
Starting a Connection by Calling a Remote Party
AAA
IP:XXX.XXX.XXX.XXX
Ready to connect.
Ready
F1
F2
F3
Room 101
Room 201
Office A
IP
One-touch dial buttons
5/11/2008 13:00
F4
Office E
Dial