Tos Setup Menu - Sony Ipela PCS-XG80 Operating Instructions Manual

On: Enables the Audio Duplex
Transmission feature.
Off: Disables the Audio Duplex
Transmission feature.
QoS3
Re-Order/Shaping
Re-Order
Allows you to select whether to correct re-
order that may cause packet loss (invalid
order of arrival in the packet). Correcting re-
order enables smoother picture and sound.
On: Corrects re-order.
Off: Does not correct re-order.
Re-Order Buffer
Allows you to select re-order buffer.
You can select from among "Auto", "1",
"2" and "Custom".
Re-Order Buffer Rate
Enter the re-order buffer rate. You can enter
the value between 1 and 5.
Shaping
Allows you to select whether to use shaping,
which adjusts the IP packet transfer rate.
On: Uses shaping.
Off: Does not use shaping.
.

TOS Setup Menu

TOS1
–
Each page allows you to configure the Type
of Service (TOS) field of specific types of
data.
TOS1: TOS (Video)
Configure the TOS field for video data.
TOS2: TOS (Audio)
Configure the TOS field for audio data.
TOS3: TOS (Data)
Configure the TOS field for camera control
signals, etc.
TOS4: TOS (Presentation)
Configure the TOS field for the RGB
presentation data.
66
Registering Local Information
TOS
Allows you to select how to define the Type
of Service (TOS) field.
Off: Does not define the TOS field.
IP Precedence: Defines the TOS field as IP
DSCP: Defines the TOS field as the
Precedence
Enter the IP Precedence value between 0 and
7.
Low Delay
Allows you to select whether to specify the
Low Delay bit of the TOS field.
On: Specifies the Low Delay bit of the TOS
Off: Does not specify the Low Delay bit of
High Throughput
Allows you to select whether to specify the
High Throughput bit of the TOS field.
On: Specifies the High Throughput bit of
Off: Does not specify the High Throughput
High Reliability
Allows you to select whether to specify the
High Reliability bit of the TOS field.
On: Specifies the High Reliability bit of the
TOS4
Off: Does not specify the High Reliability
Minimum Cost
Allows you to select whether to specify the
Minimum Cost bit of the TOS field.
On: Specifies the Minimum Cost bit of the
Off: Does not specify the Minimum Cost bit
DSCP
Enter the DSCP value. This item only
appears when "TOS" is set to "DSCP".
Precedence.
Differentiated Services Code Point
(DSCP). Enter the value between 0 and
63.
field.
the TOS field.
the TOS field.
bit of the TOS field.
TOS field.
bit of the TOS field.
TOS field.
of the TOS field.