Chapter 2:
Registration and
Setup for System
Administrators
This chapter describes the registration and settings to be carried out by the
system administrator.The chapter is intended to be read by the system
administrator.
Registering Local Information
Before connecting, register the required information on the local system using
the Setup menus. This section describes how to display the Setup menus and
gives a introduction to the menus.
Opening the Setup Menu
1
Press the Tools button on the Remote Commander, or use the V, v, B or b
button to select "Tools" in the Home menu, then press the ENTER button.
The Tools menu appears on the monitor screen.
Tools
Home
Machine Status
Setup
Presentation
[Suspended]
Execute
Streaming
[Suspended]
Execute
Recording
[Suspended]
Execute
Annotation
[Suspended]
Execute
Icon display
On
Screen Capture
Execute
5/11/2008 13:00
Registering Local Information
53