Annotation Setup Menu; General Setup Menu; Line Density - Sony Ipela PCS-XC1 Operating Instructions Manual

Registered User Name
Enter the user name for the terminal to be
registered to the SIP server (up to 39
characters).
Password
Set the password for the terminal to be
registered to the SIP server (up to 39
characters).
SIP Server Address
Enter the address of the SIP server.
SIP Server Port
Enter the port number used for
communication with the SIP server.

Annotation Setup Menu

The Annotation setup menu is used for the
annotation function allowing you to write
letters or graphics on the screen using a pen
tablet.
Note
Do not connect small USB devices to the USB
port on the front of the unit, as they may
become impossible to remove. Connect small
devices to the USB port on the rear of the unit.
Annotation
Annotation
Enable
Allows you to select whether the annotation
function is enabled.
On: Enables the annotation function.
Off: Disables the annotation function.
Color
Allows you to select the color of the letters
or graphics written on the screen with a pen
tablet.
You can select from among "Black", "Red",
"Blue", "Green", "Yellow", "Orange",
"Purple" and "White".

Line Density

Allows you to select the density of the line
written on the screen with a pen tablet.
You can select from among "Thick",
"Medium" and "Thin".
54
Registering Local Information

General Setup Menu

General1
Device Setup
Terminal Name
Input the local terminal name transmitted to
a remote party (up to 30 characters).
Standby Mode
Allows you to select whether the unit enters
standby mode if it is idle for a specified
period of time.
On: Allows the unit to go on standby.
Off: Does not allow the unit to go on
standby.
Standby Time
Specify the time the unit must remain idle
before entering the standby mode. This time
can be set between 1 and 99 minutes.
For details on the standby mode, see
"Standby Mode Function" on page 23.
Last Number Registration
Allows you to select whether to register the
remote party in the Phone Book after the
communication ends.
Off: The registration of the remote party
does not take place.
On: If the remote party is not registered in
the Phone Book, the message "Register
this participant in the list?" appears on
the monitor screen when communication
ends. When you select "OK", the List
Edit menu opens.
Control by Far End
You can temporarily reject the camera
control command transmitted by the remote
party.
On: Accepts the camera control command.
Off: Rejects the camera control command.
Language
Allows you to select the menu and display
language used by the system. You can select
from the following languages: English,
French, German, Japanese, Spanish, Italian,
Simplified Chinese, Portuguese, Traditional
Chinese, Korean, Dutch, Danish, Swedish,
Finnish, Polish, Russian, Arabic, Thai,