Viewing the Picture from the System on
a Monitor or Projector
When the monitor or projector is connected to the Communication System,
you can view the picture from the system.
To connect a monitor or projector
S VIDEO IN
AUDIO 1 IN
(PLUG IN POWER)
To use the connected display equipment
When outputting the picture both to the monitor connected to the HDMI OUT
connector and the display equipment connected to the RGB OUT connector,
set "Monitor Output" to "HDMI+RGB" on the Basic Setup page of the Video
setup menu (page 62).
For RGB output, you can select the video format of the signal output from the
RGB OUT connector with "RGB Monitor Output Format". You can select
"SXGA", "XGA" or "WXGA".
Pictures displayed on the two monitors
During communication, the following images are displayed on the two
to HDMI OUT
Connecting cable with D-sub 15-pin
Viewing the Picture from the System on a Monitor or Projector
to HDMI IN
to RGB IN