Set "PPPoE" to "On" under the PPPoE page in the LAN setup menu, and
enter the PPPoE user name and PPPoE password given to you by the
Setup > LAN > PPPoE
If you have a fixed IP from the provider, set "Fixed IP for PPPoE" to "On",
and enter your fixed IP address for PPPoE in "Fixed IP Address for
PPPoE" under the PPPoE page in the LAN setup menu.
The setting has been configured properly if the correct IP address appears
in the Home menu.
If the fixed DNS server address is specified by the provider, set "DNS" to
"Specify", and enter the specific addresses in "Primary DNS" and "Secondary
Remote parties must configure in the same way.
To connect to a remote party
Select "IP" under "Line I/F", enter the remote party's IP address, and dial.
Enter the appropriate numbers for "Area Code" and "Local Number" in the
Telephone Number page of the ISDN setup menu.
Do not enter the first 0 of the area code.
For details on the ISDN setup menu, see "ISDN Setup Menu" (page 67).
For details on configurations, consult with the system administrator.
Setting Up the Network Configurations
Fixed IP for PPPoE
Fixed IP Address for PPPoE
210. 10. 10. 10