Sony Ipela PCS-XG80 Operating Instructions Manual page 117

Up to 100 settings can be registered for the local camera and up to 6 settings
for the remote camera.
The original position of the camera is registered in the Preset number 1 button
at the factory.
To register the preset setting
1
Press the CAMERA button on the Remote Commander, or press the V, v,
B or b button to select "Camera" in the Home menu and press the ENTER
button.
The Camera menu appears.
Camera
2
Select the camera whose angle and zoom setting you want to preset.
During communication pressing the F1 button on the Remote Commander
switches between the camera on the local site and that on the remote site.
When two cameras are connected, pressing the F2 button on the Remote
Commander switches between the first and second cameras.
The selected camera is shown at the top of the Camera menu.
3
Use the V, v, B or b button on the Remote Commander to select "Preset",
then press the ENTER button.
The Preset Setting List appears.
4
Use the V, v, B or b on the Remote Commander to select "New Entry",
then press the ENTER button.
The Preset Save menu appears.
Previous
Adjustments
Brightness
Preset
Details
Adjustments > Preset Setting List
Local Camera : First Camera
New Entry
1 2
Back to Home
4 5
5/11/2008 13:00
3
6
Adjusting the Camera
117