Sony Ipela PCS-XG80 Operating Instructions Manual page 118

5
Use the V, v, B or b button on the Remote Commander to select "Preset
Number", then select the number to which the setting is stored.
Only the numbers that have not been used for presetting are selectable.
6
Use the V, v, B or b button on the Remote Commander to select
"Adjustments", then press the ENTER button, if you want to adjust the
camera zoom and angle.
The Angle Adjustment menu is displayed and you can adjust the zoom and
angle.
For the adjustment procedures, see "Adjusting the Camera Angle and
Zoom" on page 112.
7
After the adjustment is finished, press the RETURN button or the ENTER
button on the Remote Commander.
The Preset Save menu is restored.
8
Use the V, v, B or b button on the Remote Commander to select "Save",
then press the ENTER button.
The angle and zoom settings are stored in the selected number, and the
number is listed in the Preset Setting List.
To recall the preset angle and zoom setting
You can move the camera to the preset position.
1
Press the CAMERA button on the Remote Commander, or press the V, v,
B or b button to select "Camera" in the Home menu and press the ENTER
button.
The Camera menu appears.
2
Use the V, v, B or b button on the Remote Commander to select "Preset"
in the Camera menu, then press the ENTER button.
The Preset Setting List appears.
118
Adjusting the Camera
Adjustments > Preset Save
Local Camera : First Camera
Preset Number : 5
Adjustments
Camera Angle :
Save Cancel