Lan Setup Menu - Sony Ipela PCS-XG80 Operating Instructions Manual

Off: Switches the video input and the
microphone or other audio input
separately.
On: Links switching of the video input and
the microphone or other audio input.
Note
When "Link to Audio Input" is set to "On",
"Input Select", "Mic Select (MIC)" and "Mic
Select (AUX)" on the Basic Setup1 page of
Audio setup menu cannot be selected.
Video Input
Allows you to select the video input.
Camera: Selects the camera picture from
the camera connected to the CAMERA
connector.
S VIDEO: Selects the picture from the
external equipment connected to the S
VIDEO IN connector.
RGB: Selects the picture from the external
equipment connected to the RGB IN
connector.
YPbPr: Selects the picture from the external
equipment connected to the YPbPr
jacks.
Input Select
Allows you to select the audio input which is
linked to the video input selected in "Video
Input" when "Link to Audio Input" is set to
"On".
MIC: Inputs audio from the microphone.
AUX: Inputs audio from the external
equipment.
MIC+AUX: Inputs audio both from the
microphone and external equipment.
Mic Select (MIC)
Allows you to select the audio input from the
microphone when "Link to Audio Input" is
set to "On".
MIC(A1/A3): Selects to use the PCS-A1
Microphone or PCSA-A3 Microphone
connected to the MIC (A1/A3) jacks.
EC-MIC(A7): Selects to use the PCSA-A7
echo canceling microphone connected to
the EC-MIC(A7) jacks.
Mic Select (AUX)
Allows you to select the audio input from
external equipment when "Link to Audio
Input" is set to "On".
AUDIO1: Selects to input the audio of
external equipment connected to the
AUDIO 1 IN jacks.
AUDIO2: Selects to input the audio of
external equipment connected to the
AUDIO 2 IN jacks.

LAN Setup Menu

The LAN setup menu is used to set up LAN
connection.
For details about the settings, consult your
network administrator.
LAN1
Basic Setup
Host Name
Enter your host name (up to 30 characters).
DHCP Mode
Allows you to select whether the Dynamic
Host Configuration Protocol (DHCP) server
is enabled.
Auto: The IP address, network mask,
gateway address and DNS address are
automatically assigned.
Off: Disables the DHCP server. In this case,
enter an IP address, network mask,
gateway address and DNS address.
IP Address
Enter the IP address.
Network Mask
Enter the network mask.
Gateway Address
Enter the default gateway address.
Primary DNS
Enter a primary DNS address.
Secondary DNS
Enter a secondary DNS address.
LAN Mode
Allows you to select the interface type and
the communication mode of the LAN
connection.
Registering Local Information
63