Sony Ipela PCS-XG80 Operating Instructions Manual page 152

Picture displayed on the first monitor
The local or remote picture shot by the camera (moving picture) is monitored
on the first monitor connected to the HDMI OUT connector.
To switch between the local and remote pictures, press the F1 button on the
Remote Commander.
Picture displayed on the second monitor
The picture shot by the local camera or the RGB picture transmitted from the
remote party can be displayed on the second monitor connected to the RGB
OUT connector.
To switch the picture displayed on the monitor, press the F2 button on the
Remote Commander.
First monitor
Note
If no RGB picture is received, you cannot switch the picture on the second monitor.
152
Viewing the Picture from the System on a Monitor or Projector
Remote
camera
picture
Local
camera
picture
F1 button
Local
camera
picture
Remote
camera
picture
Second monitor
F2 button
Local
camera
picture
RGB
picture